樓承板作為目前建筑施工中常用的一種，能夠在效率很高的條件下搭建一個牢固可靠的施工平臺，今天小編簡單給大家講一講濟南樓承板的使用方法，感興趣的朋友可以了解一下。

As a kind of commonly used floor bearing plate in the current construction, it can build a solid and reliable construction platform under the condition of high efficiency. Today, I will give you a brief introduction to the use of floor bearing plate in Jinan. Interested friends can learn about it.

樓承板

Floor support plate

一、桁架樓板受力模式及組合模式合理，具有現澆混泥土整體剛性，能輕松地完成雙向板施工及使用，而普通的壓型板下皮垂直于肋方向鋼筋無法部。

1、 The stress mode and combination mode of truss floor slab are reasonable, with the overall rigidity of cast-in-place concrete, which can easily complete the construction and use of two-way slab, while the lower skin of ordinary profiled slab is perpendicular to the rebar in the rib direction.

二、在施工中梁間距3米以上，普通的壓型板基本上就要加設臨時支撐；鋼筋桁架模板.大無支撐間距可達5米以上。

2、 In the construction, the beam spacing is more than 3 meters, and the ordinary profiled plate basically needs to be provided with temporary support; Steel bar truss formwork. Large unsupported spacing can reach more than 5m.

三、在桁架模板上臨時開洞，基本無需加固，而且機電線、管鋪設方便。

3、 The temporary opening on the truss formwork basically requires no reinforcement, and the laying of machine, wire and pipe is convenient.

四、鋼板不參與受力、無需耐火及防腐涂料，亦無需擔心過火后修復問題，既安全又經濟，板底平整、凈高有保證，樓板雙向剛度一致、抗震性能好，解決閉口板雙向配筋問題，鋼筋間距及混凝土保護層厚度有保證。

4、 The steel plate does not participate in the force bearing, does not need fire resistance and anti-corrosion coating, and does not need to worry about the repair problem after over fire. It is safe and economical, the bottom of the plate is flat, the net height is guaranteed, the two-way stiffness of the floor is consistent, and the seismic performance is good. It solves the two-way reinforcement problem of the closed-end plate, and the reinforcement spacing and the thickness of the concrete protective layer are guaranteed.

五、雙向板設計及施工簡便，適用于大跨度廠房，鍍層合理、栓釘焊接質量可靠、端部無需穿透焊，樓板抗剪性能好。

5、 The two-way slab is simple in design and construction, suitable for large-span plants, with reasonable coating, reliable stud welding quality, no need for penetration welding at the ends, and good floor shear resistance.

樓承板是將樓板中的鋼筋在工廠采用進口設備加工成鋼筋桁架，并將鋼筋桁架與鍍鋅鋼板在工廠焊接成一體的組合模板。在使用階段，鋼筋桁架與混凝土共同工作，承受使用荷載。更多相關使用事項就來網站http://www.gp552.com咨詢吧！

The floor support plate is a composite formwork that uses imported equipment to process the steel bars in the floor slab into steel bar trusses in the factory, and welds the steel bar trusses and galvanized steel plates into a whole in the factory. In the use stage, the steel truss and concrete work together to bear the service load. For more information, please come to the website http://www.gp552.com Consult!